The product: quartz agglomerate

The product: quartz agglomerate
Quartz agglomerate is a material produced in the form of slabs of 304 x 140 cm using Bretonstone®system technology and a special process of “vibro-compression in a vacuum”. The slabs are created by mixing siliceous sand or pure quartz (95%) with structural polyester resin (5%) and coloured pigments stabilized with UV rays. The material has the ideal characteristics for use in the sector of public and private furnishings. The quartz- or silica-based slabs preserve their own original physical-mechanical properties, which are:
• compact aspect;
• high resistance to bangs, abrasion and chemical agents;
• absorption of liquids basically inexistent;
• high resistance to compression and flexion;
• uniformed colouring, indispensable in the field of furnishings for the creation of kitchen counters and bathroom tops and furnishings in general;
• easy maintenance (does not require the application of any kind of treatment);
• long-term availability;
• good dimensional and chromatic stability;
• vast range of colours to meet all possible needs.

Indications for maintenance

Indications for maintenance
Quartz composites are materials that are highly compact and not porous, thus requiring no oleo-hydro-repellent treatment. They do not absorb liquids, smells or food fats. Since they are not porous, they do not allow the proliferation of bacteria, resist acids, are easy to clean and hygienic. They are resistant to stains and wear and tear, scores, scratches and light bangs. Although the material is resistant to high temperatures, it should still be protected with potholders to avoid the direct contact of the saucepan or kitchenware surfaces when they have just come off the stove. Indeed, direct contact with overheated objects or flames might result in permanent marks due to the heating of the resin or cracks created by the thermal shock. The counter should never be used as an ironing board. Although resistant to scores and scratches, if its original appearance is to be preserved, the use of chopping boards is always to be advised. Furthermore, the work tops should never be overloaded with weights exceeding 50 kg (do not stand or sit on the counter) and make sure blunt objects do not fall on it (knives, bottles, saucepans, working tools, etc) which, owing to their shape, may cause cracks that are difficult if not impossible to repair.

Advice for cleaning polished quartz surfaces


Suggestions for the ordinary cleaning and maintenance of polished quartz surfaces

For the ordinary cleaning of Marmo arredo quartz resin surfaces it is possible to use common detergents but it is advisable to use the specific detergent formulated by Federchemicals™ called A-shine plus created and tested in partnership with our laboratories. The simple use through a microfibre soft cloth that guarantees a deep cleaning without residues or not desired signs (suitable also for inox steel, like taps and fittings or on glass surfaces). Avoid to clean surfaces with denaturated alcohol that, drying up, could leave halos that are hard to remove. Not suitable products: avoid to clean the surface with products containing bleach or with highly basic pH that, in case of prolonged applications, can create a whitish halo. Other products that can damage the surface are trichloroethylene, industrial solvents, hydrofluoric acid, lye and solvents for varnishes.


Suggestions for the cleaning the extraordinary maintenance of polished quartz surfaces

In case of appearance of persistent deposit superficial stains are created (like limestone), it is possible to use a slightly acidic base product A-cleaner in order to remove them. A-cleaner must be uniformly distributed in a needed quantity according to the surface to be cleaned possibly using a sponge or gloves and taking care the product to be in contact with surfaces that are sensitive to acid substances. Let the product act, rub with the anti-scratch sponge and then rinse again with water and let it dry. The product A-cleaner is contained into the Quartz Kit, a comfortable kit of maintenance including anti-scratches sponge for the extraordinary cleaning, TNT cloth for the ordinary cleaning and the ready-to-use spray detergent A-shine.


Advice for cleaning brush surfaces

Advice for cleaning brush surfaces
The smoothing and sandblasting of the surfaces to obtain a honed, velvet, sandblasted and brushed, tatum surface is done mechanically with the appropriate equipment that carries out the mechanical working process needed to obtain the various finishes by removing part of the material. The resulting surfaces therefore have knurls or degrees of unevenness that are evident to varying degrees, so that the material does not reflect the light like a polished surface (fig. 1) but is opaque and rough to the touch (fig. 2). The degree of roughness depends on the various finishing. If one observes the two figures describing a polished and a smooth finish, one can see that the polished surface counter is perfectly rectilinear while the one with the opaque surface has an irregular line. This is why the surfaces finished so they have a honed, velvet, sandblasted and brushed, tatum surface may have problems regarding dirtiness. Indeed, the dirt particles on the polished surface are easy to remove since no physical obstacle is keeping them back, while on the other surface there may be deposits on the micro knurls or small bumps that are more difficult to remove.
Everyday cleaning:
any detergents usually used for polished surfaces may be used. Coloured liquids that come into contact with the surface should be cleaned immediately, when the stain is still fresh. The agglomerate material of quartz does not absorb liquid substances and the dirt that might be retained by the micro-knurling does not penetrate the material and can therefore always be removed. In the case of more persistent dirt, acid-based aggressive detergents may also be used. Avoid cleaning the surface with denatured alcohol which leaves streaks that are difficult to remove when it dries.
Scale-marks (remains of aqueduct water):
we recommend cleaning with Viakal (or other acid-based anti-scale detergents) which may be used for prolonged periods of time.
Greasy or fatty substance stains:
grease-removal detergents for the kitchen may be used but once the stain has been removed, the area must be rinsed thoroughly with water. “Grease-removal” products are usually “basic” and, if left to act on a quartz agglomerate for a long time they might change the surface, leaving stains (they react with the resin content).


Suggestions for extraordinary and ordinary cleaning for quartz-resin slabs and floors

SOFT CLEAN (Federchemicals company) is a descaling detergent which is particularly indicated for the removal of after-laying residues, it brings the dirt in suspension guaranteeing the complete removal during washing even on floors that are blacked by tenacious dirts, foot traffic, hard waters and smog.


Useful contacts

Federchemicals assistance service for Marmo Arredo customers

030 304139 from 10am to 12am



Download our cleaning advices brochure here


Summary tables

Summary tables